Bil-Jax PT10 push-around vertical lift
Specifications for the Bil-Jax PT10 from the archived Bil-Jax literature, and parts and service for it from an independent shop in Orlando, Florida.
The Bil-Jax PT 10 (PT10) is a battery powered push-around vertical lift, the first unit in the Apex Series, built for maintenance and construction work indoors and out. At 30 inches wide it goes through a standard doorway, and it lifts 500 lb to a 10 ft 1 in platform height.
The superstructure is fabricated steel with a powder-coated finish. Standard equipment is push-button controls, heavy-duty automatic locking casters, an automatic charger and a 110V outlet at the platform; outriggers, a tilt alarm and a clip-on tool tray were available.
Bil-Jax PT10 specifications
From the old PT10 page, as archived on the old aerialworkplatform.net site.
| Maximum working height | 16 ft 1 in |
|---|---|
| Maximum platform height | 10 ft 1 in |
| Platform size | 29 in x 5 ft (29 in x 60 in) |
| Overall width | 30 in |
| Overall length | 5 ft 5 in |
| Stowed height | 6 ft 3 in |
| Lift capacity | 500 lb |
| Main power | 110V |
| Battery power | 12V DC, automatic charger included |
| Casters | automatic locking |
| Total weight | 880 lb |
Where the literature disagrees
Figures changed between production years and with options, so the serial plate on your machine is the final word. Other archived PT10 literature says:
- The old PT10 page also carried a summary table that listed the weight as 850 lb; its own specification list and description both say 880 lb.
Working height is the platform height plus 6 ft (2 m in metric), as is standard for aerial work platforms. Later Bil-Jax literature carries the Haulotte Group name, which is why the same machine is also looked up as the Haulotte PT10.
About the PT10
- 30 in wide, passes through a standard doorway
- Push-button controls
- Heavy-duty automatic locking casters
- 12V DC battery with automatic charger included
- Options: outriggers, tilt alarm, clip-on tool tray
PT10 parts and service
Robert's Diesel Works is an independent shop in Orlando, Florida. We are not a Bil-Jax or Haulotte dealer. We find parts for the PT10 by model and serial number, new or used, and we service and repair these lifts at our shop. Parts we are asked for on this model:
- Lift cylinder and mast parts, hoses and fittings
- 12V batteries and automatic chargers
- Push-button control parts, switches and the tilt alarm
- Locking casters, outriggers and the clip-on tool tray
Send us the model and serial number from the plate, the part number if you can read it, or a photograph of the part, and we will work out what it is and quote it. We ship anywhere.
Looking for a used PT10?
The lifts once listed on this site have sold. Used Bil-Jax machines come through our shop from time to time, so call (877) 697-6272 and ask what we have, or leave your details in the form below. If you are buying a PT10 somewhere else, we can look it over before you pay for it.
Cranes, crane trucks and other manlifts are at drywallcranes.com.