Independent Bil-Jax lift parts, service and specifications Orlando, Florida ยท Monday to Friday, 8 am to 5 pm Eastern

Bil-Jax 3632T trailer-mounted telescopic boom lift

Specifications for the Bil-Jax 3632T from the archived Bil-Jax literature, and parts and service for it from an independent shop in Orlando, Florida.

The Bil-Jax 3632T is a trailer-mounted telescopic boom lift with about 43 ft of working height and 32 ft of outreach, an unusually long reach for a towable machine. Hydraulic outriggers level it automatically in about 30 seconds, and it tows behind a half-ton pickup at up to 65 mph.

It was built as a 24V DC battery machine or as a DC and gas hybrid. The platform carries two people and has a 110V GFI outlet, and with the material lifting option the 3632T works as a light-duty crane. It can be run from the platform or from the ground station.

Bil-Jax 3632T specifications

From the Bil-Jax Summit Series towable specification sheet, as archived on the old aerialworkplatform.net site.

Working height43 ft 6 in (13.4 m)
Maximum platform height37 ft 6 in (11.4 m)
Horizontal outreach, from centerline32 ft (9.8 m)
Horizontal outreach, from edge of footpad27 ft (8.2 m)
Up and over heightN/A (telescopic boom)
Platform capacity500 lb (227 kg)
Stowed length21 ft 11 in (6.7 m)
Stowed width5 ft 5 in (165 cm)
Stowed height76 3/4 in (195 cm)
Outrigger footprint12 ft 4 in x 11 ft 4 in (3.8 m x 3.5 m)
Footpad diameter12 1/2 in (32 cm)
Tongue weight200 lb with no options, 300 lb with all options
Tire sizeST 225/75 R15D
Charger40 amp
Machine weight, no options4,400 lb (1,996 kg)
Platform size48 in x 30 in, 43 in rail height
Platform rotation (option)120 degrees, manual
Turntable rotation700 degrees, non-continuous
Outriggershydraulic, automatic leveling
Leveling capability12 1/2 degrees
Tow speed rating65 mph
Brakeshydraulic surge brakes standard (electric optional), mechanical parking brake
Control system24V DC
Batteries4 x 6V, 245 amp-hr

Where the literature disagrees

Figures changed between production years and with options, so the serial plate on your machine is the final word. Other archived 3632T literature says:

  • Older 3632T literature quotes 42 ft of working height and 32 ft of outreach.
  • The later technical data sheet lists 4,440 lb and a 12 ft 2 in x 11 ft 4 in outrigger footprint.

Working height is the platform height plus 6 ft (2 m in metric), as is standard for aerial work platforms. Later Bil-Jax literature carries the Haulotte Group name, which is why the same machine is also looked up as the Haulotte 3632T.

About the 3632T

  • Automatic leveling in under 30 seconds
  • 12 1/2 degree leveling capability
  • Simple telescopic boom, zero tail swing
  • 12 1/2 in (32 cm) non-marking outrigger footpads
  • Hydraulic surge and parking brakes
  • Integrated forklift pockets

3632T parts and service

Robert's Diesel Works is an independent shop in Orlando, Florida. We are not a Bil-Jax or Haulotte dealer. We find parts for the 3632T by model and serial number, new or used, and we service and repair these lifts at our shop. Parts we are asked for on this model:

  • Outrigger cylinders, seal kits, holding valves and the automatic leveling sensors and controls
  • Boom and jib cylinders, wear pads, pins and bushings
  • Hydraulic pump and motor units, valves, hoses and fittings
  • 24V batteries, chargers, battery condition meters and the gas or hybrid engine parts
  • Platform and ground control boxes, switches, tilt alarms and wiring
  • Surge brake actuators, hitches, hubs, bearings and trailer tires

Send us the model and serial number from the plate, the part number if you can read it, or a photograph of the part, and we will work out what it is and quote it. We ship anywhere.

Looking for a used 3632T?

The lifts once listed on this site have sold. Used Bil-Jax machines come through our shop from time to time, so call (877) 697-6272 and ask what we have, or leave your details in the form below. If you are buying a 3632T somewhere else, we can look it over before you pay for it.

Cranes, crane trucks and other manlifts are at drywallcranes.com.

Ask about the Bil-Jax 3632T

We answer during business hours. For anything urgent call (877) 697-6272.